Prijavljivanje
Novi ste kupac?
Registrujte se i osigurajte sebi mnoge prednosti:
Provera raspoloživosti proizvoda
Brza porudžbina i istorija porudžbine
Lične preporuke za proizvod
Plaćanje prema računu
Contact HANSA-FLEX

You have any questions about our online shop or our products?
You can call our customer service at:

+49-421-48907-766
Monday - Friday: 7:00AM - 6:00PM
Except saturdays, sundays and holidays
Or use our FAQ

There you get answers to the most frequently asked questions.

Najčešća pitanja

Šta tražite?

Unesi pojam pretrage

Žao nam je!

Nije pronađen nijedan rezultat pretrage.

  • Pneumatska tehnika

Pneumatska tehnika

2.163 Modeli
Svi filteri
Radni pritisak
Oblik zaptivke 2
Spoljni-Ø nom.
Proradni pritisak
Unutrašnji-Ø nom.
Temperatura maks.
Temperaturni opseg
Konstrukcija
spoljni izgled
DN*
DN
SW
Konstrukcija
Oblik zaptivke 1
Napon
Temperatura min.
Approval
Radni pritisak bar
Media
Verzija
Serija
BD* pri 20°C
Radni pritisak
Priključak 4
Priključak 3
G1
Konstrukciona veličina
Cev spolja Ø
G2
Priključak 2
Application
B
Serija
Priključak 1
Priključak
Oblik zaptivke 3
Izlazni pritisak
Norma
Pogled iznutra
Materijal
Umetak
Prikaži sve filtere
Prikaži manje filtere
Radni pritisak
0 - 35 bar, maximum static working pressure (non-pulsating)  maks. 10 bara  Max. 16 bar  -0,99 bara - 15 bara  0 - 10 bara  60 bara  0 - 35 bara  1,5 - 8 bara  Max. 40 bar  2.5 - 10 bar (monostable) 1.0 - 10 bar (bistable Max. vacuum 10 bar (external pilot air)  Dependent on operating temperature; Max. 10 bar (at 20 °C); Max. 1 bar (at 60 °C)  Max. 16 bar (at +20 °C)  maks. 12 bara  0,5 - 10 bara  maks. 20 bara  0 - 8 bara  max. 63 bar (depending on temperature and nominal size)  2 - 10 bara  Dependent on operating temperature; Max. 10 bar (at 20 °C); Max. 1 bar (at 170 °C)  Dependent on operating temperature; Max. 10 bar (at 20 °C); Max. 2.5 bar (at 90 °C)  maks. 8 bara  2,5 - 10 bara  Max. 25 bar  max. 250 bar brass, max. 400 bar steel/stainless steel  max. 70 bar (depending on temperature and nominal size)  0,5 - 60 bara  1 - 10 bara  2,5 - 10 bar (monostable) 1,0 - 10 bar (bistable) vacuum up to 10 bar (external pilot air)  2,5 - 7 bara  2.5 - 10 bar; Max. vacuum 10 bar (external pilot air)  -0,99 - 20 bara  0,5 - 12 bara  1 - 35 bar and rough vacuum  Liquidscolon 40/32 bar depending on the port size; Gascolon max. 5 bar (MOP 5)  Max. 12 bar, maximum static working pressure (non-pulsating)  Max. 15 bar  Max. vacuum 10 bar  max. 40 bar (to DN 32); max. 25 bar (from DN 40); max. 16 bar (from DN 65)  max. 64 bar  0,2 - 50 bara  10 bara  2,5 - 8 bara  DN 15 - DN 32colon max. 40 bar; DN 40 - DN 50colon max. 25 bar  Max. 28 bar  max. 14 bar  max. 16 bar for valves with cutting ring connection; max. 4 bar for valves with pipe thread  max. 160 bar (G 3/8, G 1/2); max. 100 bar (G 3/4, G 1); max. 60 bar (G 1 1/4, G 1 1/2); max. 40 bar (G 2)  max. 18 bar  max. 63 bar  min. 0,35 bar; max. 8,5 bar  0 - 16 bara  0,2 - 26 bara  0,5 - 20 bara  0,99 - 20 bara  15 bar (12 bar at G 1)  16 bara  2 - 16 bara  2 - 25 bara  2.5 - 10 bar (monostable) 1.0 - 10 bar (bistable) Max. vacuum 10 bar  4,5 bara  5 bara  DN 15 - DN 50colon max. 40 bar; DN 65 - DN 100colon max. 16 bar  Max. 16 bar; 13.5 x 9.5 mm hosecolon max. 12 bar  Max. 24 bar  Max. 25 bar (on stem)  Max. 25 bar (on thermowell)  Max. 6 bar (copper alloy), Max. 25 bar (stainless steel)  Max. 6 bar (on thermowell)  Max. 9 bar  max. 10 bar (to the temperature +20 °C); max. 7 bar (at temperature +40 °C); max. 5 bar (at temperature +60 °C)  max. 11 bar  max. 12 bar (K-07100622); max. 20 bar (K-07100623)  max. 200 bar  max. 400 bar (at 20 °C); max. 250 bar (at G 1 - 20 °C)  max. 55 bar (depending on connection size and temperature)  max. 6 bar  max. 70 bar (Depending on Temperature)  min. 0,0 bar; max. 15,0 bar  min. 2 bar; max. 6 bar  min. 4 bar; max. 16 bar 
Proradni pritisak
0,2 bara  0,25 bara  0,27 bara  0,3 bara  0,35 bara  0,38 bara  0,4 bara  0,45 bara  0,5 bara  0,55 bara  0,6 bara  0,65 bara  0,7 bara  0,75 bara  0,8 bara  0,83 bara  0,9 bara  0.5 to 1.0 bar  1,0 bara  1,1 bara  1,2 bara  1,25 bara  1,3 bara  1,4 bara  1,5 bara  1,6 bara  1,7 bara  1,75 bara  1,8 bara  1,9 bara  1.0 to 4.0 bar  10,0 bara  10,1 bara  10,2 bara  10,3 bara  10,4 bara  10,5 bara  10,6 bara  10,7 bara  10,8 bara  10,9 bara  10.0 to 18.0 bar  11,0 bara  11,2 bara  11,3 bara  11,4 bara  11,5 bara  11,6 bara  11,7 bara  11,76 bara  11,8 bara  12,0 bara  12,1 bara  12,2 bara  12,3 bara  12,4 bara  12,5 bara  13,0 bara  13,2 bara  13,3 bara  13,5 bara  13,8 bara  14,0 bara  14,2 bara  14,3 bara  14,5 bara  14,7 bara  14,8 bara  15,0 bara  15,1 bara  15,2 bara  15,3 bara  15,4 bara  15,5 bara  15,6 bara  15,7 bara  15,8 bara  16,0 bara  16,5 bara  16,8 bara  16,9 bara  16.0 to 32.0 bar  17,0 bara  17,1 bara  17,5 bara  17,6 bara  18,0 bara  18,5 bara  18,9 bara  19,0 bara  19,1 bara  19,4 bara  19,5 bara  19,6 bara  19,7 bara  19,8 bara  2,0 bara  2,1 bara  2,2 bara  2,3 bara  2,4 bara  2,5 bara  2,6 bara  2,7 bara  2,8 bara  2,9 bara  20,0 bara  20,5 bara  20,8 bara  21,0 bara  21,5 bara  22,0 bara  22,1 bara  22,5 bara  22,7 bara  22,8 bara  23,0 bara  23,1 bara  23,2 bara  23,4 bara  23,5 bara  24,0 bara  24,5 bara  25,0 bara  25,2 bara  25,5 bara  26,0 bara  26,5 bara  26,6 bara  27,0 bara  27,2 bara  27,5 bara  27,6 bara  27,9 bara  28,0 bara  28,5 bara  28,6 bara  29,0 bara  29,4 bara  29,5 bara  3,0 bara  3,1 bara  3,2 bara  3,3 bara  3,4 bara  3,5 bara  3,6 bara  3,7 bara  3,8 bara  3,9 bara  3.0 to 7.0 bar  30,0 bara  30,5 bara  30,8 bara  30.0 to 60.0 bar  31,0 bara  31,5 bara  32,0 bara  32,5 bara  33,0 bara  33,3 bara  33,5 bara  33,7 bara  34,0 bara  34,1 bara  34,5 bara  35,0 bara  35,5 bara  36,0 bara  36,3 bara  36,4 bara  36,5 bara  36,8 bara  37,0 bara  37,5 bara  38,0 bara  38,5 bara  39,0 bara  39,5 bara  4,0 bara  4,1 bara  4,2 bara  4,3 bara  4,4 bara  4,5 bara  4,6 bara  4,7 bara  4,8 bara  4,9 bara  40,0 bara  40,5 bara  41,0 bara  41,5 bara  42,0 bara  43,0 bara  43,4 bara  43,5 bara  44,0 bara  44,8 bara  45,0 bara  46,0 bara  47,0 bara  47,5 bara  48,0 bara  5,0 bara  5,1 bara  5,2 bara  5,3 bara  5,4 bara  5,5 bara  5,6 bara  5,7 bara  5,8 bara  5,9 bara  50,0 bara  6,0 bara  6,1 bara  6,2 bara  6,3 bara  6,4 bara  6,5 bara  6,6 bara  6,7 bara  6,8 bara  6,9 bara  6.0 to 12.0 bar  7,0 bara  7,1 bara  7,2 bara  7,3 bara  7,4 bara  7,5 bara  7,6 bara  7,7 bara  7,8 bara  7,9 bara  8,0 bara  8,1 bara  8,2 bara  8,3 bara  8,4 bara  8,5 bara  8,6 bara  8,7 bara  8,8 bara  8,9 bara  9,0 bara  9,1 bara  9,2 bara  9,3 bara  9,4 bara  9,5 bara  9,6 bara  9,7 bara  9,8 bara  9,9 bara 
Konstrukcija
against + switching  aluminium bracket  aluminium flat jacket  anodised aluminium  ball seat valve (ball seat, brass)  centrifugal principle-filter  centrifugal principle-filter, membrane pressure regulator with secondary venting, oil mist lubricator  Cevni nastavak  Cevni utični trn  compressed air tank  diaphragm pressure regulator with relieving, centrifugal filter  diaphragm pressure regulator with relieving, centrifugal principle-filter, oil mist lubricator  diaphragm pressure regulator with secondary venting  digital flow switch  fiber filter  Gumeni prsten za kandžaste spojnice  Gumeni prsten za MODY spojnice  Kandžasta spojnica sa spoljašnjim navojem  Kandžasta spojnica sa unutrašnjim navojem  Kandžasta spojnica za crevo  Kontra navrtka  MODY spojnica sa spoljašnjim navojem  MODY spojnica sa unutrašnjim navojem  MODY spojnica za crevo  Naglavak brze spojnice  namontiran  Nastavak reducir spojnica  Navrtna spojnica  Okretna kandžasta spojnica sa spoljašnjim navojem  Okretna kandžasta spojnica sa unutrašnjim navojem  Okretna kandžasta spojnica za crevo  operated by secondary pressure  pneumatic actuators, in double- or single acting version  pneumatic actuators, in double- or single acting version, with integrated end-position indicator  pneumatic, double-piston, part-turn actuator, double-rocker principle  poppet valve, spring-loaded  Povratno koleno  precision digital pressure switch for excess pressure  Preklopna navrtka  Pričvrsni zavrtanj za kandžastu spojnicu sa zaptivkom od mesinga.  Promenljivi reducir  Prsten creva za kandžastu spojnicu sa zaptivkom od mesinga  Rezervni lanac za završnu kandžaste spojnice  rocker mounted on pin  sa gumenom papučom  sa kontrolnim priključkom  sa plastičnom navojnom kapicom  sa preklopnom navrtkom  Spajanje preko navoja  Spajanje preko navoja sa reducirom  Spojni nastavak sa reducirom  Spojni nastavci  Spojnica za pregradni utikač  spring-loaded diaphragm (NBR)  spring-loaded diaphragm (NBR); spring-loaded piston; (10 to 70 bar versions)  spring-loaded diaphragm (UR); spring-loaded piston; (10 to 70 bar versions)  spring-loaded, non-return diaphragm valve with adjustable opening pressure  Stezni prsten  stroke adjustment screw  Ugaona spojnica sa zidnom priključnom pločom  Utikač brze spojnice  Utikač brze spojnice DN 7, 2  Utikačka spojnica  Utična spojnica  Uvrtna navojna spojnica  Uvrtni navojni nastavak  with feeder under pressure  za pričvršćivanje pregradinog zida  Zavrtanj za zatvaranje, sa spoljašnjim šestougaonikom  Zavrtanj za zatvaranje, sa unutrašnjim šestougaonikom  Završna spojnica  Čaura od mesinga za kandžastu spojnicu sa zaptivkom od mesinga.  Čaura za ojačanje  Čep za zatvaranje za utikačku spojnicu 
Media
Air and nitrogen  Air or neutral gases (≤ 50 μm filter specified)  Air or neutral gases, filtered 50 μm lubricated or unlubricated  Air, neutral gases, filtered  Air, neutral gases, water, oil  Compressed air and all gases or liquids that are compatible with the materials  compressed air containing oil mist (RMA Class A)  Compressed air, neutral gases  Compressed air, non-corrosive gases  Compressed air, non-corrosive gases, non-flammable gases  Condensate (emulsion)  Drinking water  Drinking water, nitrogen, compressed air, non-aggressive liquids  dry, oil-free air and non-aggressive gases  Filtered (50 μm), unlubricated or lubricated compressed air. If lubrication is used, it must be continuous.  Filtered, unlubricated compressed air  Filtered, unlubricated or lubricated compressed air. If lubrication is used, it must be continuous.  Fine-filtered (5 μm), unlubricated compressed air, neutral gases  Gradski gas, tečni gas, metan  hladna i topla voda, ulja  inertni gasovi npr. N2/CO2  Komprimovani vazduh  Komprimovani vazduh i ugljovodonični materijali uopšteno  komprimovani vazduh koji sadrži ulje  Mast  Micro-filtered, unoiled compressed air (0.01 μm)  mineralno ulje  Non-aggressive gases. dry, oil-free air  Only for clean compressed air  Pogonski materijali  postojano na alifatične ugljovodonične materijale i većinu ulja za podmazivanje  postojano na hidrolizu i mikrobe  postojano na starenje pri delovanju kiseonika i ozona  postojano na vodnjikave kiseline, razređene baze i soli  postojano na vodnjikave kiseline, razređene baze i soli kao i mnoštvo rastvarača  tečni medijumi  Vacuum  Vazduh  voda  Water / steam, salt water, salt water, ester, ketone, alkali, caustic soda, sodium hydroxide. Not recommended for hydrocarbons  Water and ethylene glycol aqueous solution (having viscosity max. 3 mPa · s [3 cP]) 
Verzija
Bourdon-tube pressure gauge acc. to EN 562  Bourdon-tube pressure gauge for precision measurements  Bourdon-tube pressure gauge in standard design  Bourdon-tube pressure gauge with parallel male connector and two separate measuring systems  Bourdon-tube pressure gauge, CrNi steel type  Bourdon-tube pressure gauge, CrNi steel type, all-stainless steel  Bourdon-tube pressure gauge, CrNi steel type, with solid baffle wall and blow-out (safety housing)  Bourdon-tube pressure gauge, standard design, mounting ring  Burdon-ov manometar sa glicerinskim punjenjem  Calibration, testing and service unit  Capsule-type pressure gauge  Chromium plated sheet steel  contact type 821.21  Diaphragm pressure gauge in robust design or for chemical applications  Glycerine-filled bourdon-tube pressure gauge, CrNi steel type  Glycerine-filled Bourdon-tube pressure gauge, CrNi steel type, with solid baffle wall and blow-out (safety housing)  Plunger rod with integrated vacuum guide  Pre-wired  rack and pinion  Robust Bourdon-tube pressure gauge  Robust Bourdon-tube pressure gauge with electrical contact (magnetic spring contact)  Spring plunger with high-strength steel rodl, guide sleeve and lower damping spring  Steel chrome plated or black or with triangular bezel  Type "CA" = ground cover with threaded pin - swivel design  Type "CM" = ground cover with threaded pin round - swivel design  With male connector or welded connection on the pressure tap side  with pressure gauge  with pressure gauge and silencer  with pressure gauge and silencer, angled  with pressure gauge and with high performance muffler  with pressure gauge and with high performance muffler, angled  with switching function display unit 
Serija
Application
Air, hydraulic oil, oil emulsions, water  Air, neutral gases (lubricated or unlubricated)  Air, oil emulsions, water  Air, vacuum  Compressed air, water, non-toxic and neutral gases, heating oil (EL),(S), luibricants, dieseloil, water beased coatings  Compressed air, water, non-toxic and non-corrosive gases, heating systems, agriculture  Compressed air, water, oil  Compressed air, water, oils, non-toxic gases  Gas, compressed air, water, oil, weak alkaline solutions  Handling of highly sensitive parts  Handling of highly uneven parts (e.g.tubes)  Handling of narrow parts and bars  Handling of parts which only have narrow and small places to grab them.  Handling of parts with plain to an slightly rough surface like sheets, cartons, glass, plastics  Industrija i građevinarstvo  Kompresori  Konstrukcija sistema  Laboratorija i prehrambena industrija  Laboratorijska tehnika  na gradilištu, površinskim kopovima i u rudniku  Opseg niskog pritiska  opšta primena za vazduh, vodu itd.  Pneumatic applications  Pneumatske kočnice  Primena u oblastima pneumatike, vakuuma i prehrambene industrije  Proizvodnja posuda i aparata  Rudarstvo  Tehnika vozila  u kamenolomu, kod visoko i nisko gradnje, brodogradnje, benzinskih pumpi  Upravljački vodovi u hidraulici i pneumatici  Water, gaseous and non-corrosive media, compressed air  welding equipment  welding machines  Welding Related areas  welding robots  za kompresore  za kompresore, kod grubih uslova korišćenja u rudarstvu,  za napajanje komprimovanim vazduhom u građevinarstvu, za kompresore, crevovode i pneumatske čekiće. 
B
102,6 mm  104,0 mm  107,8 mm  108,0 mm  108,5 mm  109,0 mm  109,5 mm  110,0 mm  111,5 mm  111,6 mm  112,0 mm  112,5 mm  114,0 mm  114,8 mm  117,8 mm  119,0 mm  122,0 mm  122,8 mm  123,5 mm  124,0 mm  126,0 mm  127,0 mm  128,5 mm  129,5 mm  131,0 mm  132,0 mm  133,5 mm  134,0 mm  134,1 mm  136,3 mm  136,6 mm  136,8 mm  137,0 mm  137,8 mm  138,1 mm  138,7 mm  139,0 mm  140,5 mm  141,0 mm  142,0 mm  142,5 mm  142,8 mm  143,0 mm  144,0 mm  144,5 mm  144,7 mm  145,1 mm  145,9 mm  147,0 mm  147,6 mm  148,0 mm  149,5 mm  150,0 mm  150,3 mm  151,5 mm  152,0 mm  152,1 mm  152,5 mm  153,0 mm  154,0 mm  155,0 mm  156,0 mm  157,0 mm  158,0 mm  160,0 mm  161,0 mm  162,0 mm  162,3 mm  163,4 mm  163,5 mm  164,0 mm  165,0 mm  165,5 mm  166,6 mm  167,0 mm  167,8 mm  168,0 mm  168,2 mm  169,0 mm  169,5 mm  170,0 mm  171,0 mm  175,0 mm  177,0 mm  177,7 mm  178,5 mm  179,5 mm  180,0 mm  180,8 mm (185,8 mm)*  181,0 mm  181,3 mm  181,8 mm  182,6 mm  182,7 mm (187,7 mm)*  182,8 mm  183,0 mm  183,7 mm  184,0 mm  184,5 mm  185,0 mm  185,5 mm  186,5 mm  187,0 mm  188,0 mm  188,5 mm  189,5 mm  190,0 mm  191,0 mm  191,5 mm  192,0 mm  192,1 mm  193,0 mm  194,0 mm  195,0 mm  196,0 mm  196,7 mm  197,0 mm  198,2 mm  198,6 mm  200,8 mm  201,0 mm  202,0 mm  203,0 mm  204,0 mm  205,0 mm  206,0 mm  208,2 mm  21,0 - 28,0 mm  210,0 mm  210,5 mm  213,0 mm  213,5 mm  214,5 mm  216,0 mm  217,0 mm  220,0 mm  223,4 mm  224,0 mm  225,0 mm  225,5 mm  226,0 mm  227,9 mm  228,0 mm  228,5 mm  229,0 mm  230,5 mm  232,5 mm  233,0 mm  234,0 mm  236,2 mm  240,0 mm  240,5 mm  242,0 mm  243,0 mm  246,0 mm  246,3 mm  247,0 mm  248,0 mm  25,0 mm  250,0 mm  252,5 mm  254,0 mm  255,0 mm  256,0 mm  257,0 mm  260,0 mm  261,0 mm  262,0 mm  264,0 mm  266,4 mm  266,8 mm  269,0 mm  270,4 mm  270,5 mm  273,0 mm  274,0 mm  280,5 mm  281,5 mm  282,8 mm  284,0 mm  285,0 mm  29,0 mm  294,0 mm  296,5 mm  299,0 mm  299,4 mm  302,0 mm  305,8 mm  307,7 mm  313,4 mm  316,0 mm  322,9 mm  323,0 mm  324,3 mm  329,0 mm  343,0 mm  359,0 mm  36,0 mm  361,0 mm  363,0 mm  376,0 mm  379,0 mm  38,0 - 48,0 mm  381,0 mm  381,4 mm  381,8 mm  382,8 mm  385,0 mm  39,5 - 49,5 mm  392,0 mm  40,0 mm  419,0 mm  44,0 mm  452,0 mm  454,6 mm  46,5 mm  47,5 - 60,5 mm  48,0 mm  49,0 - 62,0 mm  51,0 mm  52,0 mm  54,0 mm  54,2 mm  56,0 mm  57,6 mm  60,0 mm  65,5 mm  66,0 mm  67,0 mm  68,0 mm  70,0 mm  71,6 mm  72,0 mm  72,5 mm  75,0 mm  75,4 - 90,0 mm  75,9 - 90,5 mm  76,0 mm  76,3 mm  77,5 mm  78,0 mm  80,0 mm  80,5 mm  81,0 mm  81,4 mm  85,0 mm  87,5 mm  89,0 mm  9,0 mm  92,0 mm  93,0 mm  94,0 mm  94,8 mm  97,3 mm  98,0 mm 
Materijal
(HSS) Steel  1.4571  Acetalpolymerisat (POM)  Acetat kopolimer  Aluminijum  Aluminium / POM  Aluminium surface treated  Aluminium UNI 9006/1 Al Mg 0,5 Si 0,4 Fe 0,2  Aluminium, painted black  Aluminium, unpainted  Anodised aluminium / technopolymer  ASTM F 36 J (NBR with aramid fibers)  bakar  Bakarna legura  Ball: Stainless steel  Black malleable iron B350-10, design symbol A  black steel ST 37-2  Black-finished steel  Brass with a bare metal surface  carbon steel  Cast-iron  Cink  Copper alloy, CrNi-Steel 1.4571  CrNi steel 1.4571  Cu  Die-cast zinc  Duplo oslojavanje od O-prstena od elastomera  Galvanised steel  Galvanised steel / brass  Glava spojnice od temper liva / naglavak od čelika  Griff aus Stahl, ab 2-1/2" Aluminium  Guma  hardened nickel plated steel  hardened zinc plated steel  Hood :aus Messing, Gehäuse aus Kunststoff (PA)  iron  Kugla od mesinga, tvrdo hromirana  Kuglični ventil od mesinga  Kućište je od mesinga  Kućište od aluminijuma  Kućište: pocinkovani čelik  liv  Malleable iron  Mesing  Mesing, niklovan  NBR - Acrylic-nitrile, butadiene rubber  nickel plated iron  Nickel-plated brass (banjo bolt), brass (ring nipple)  Nickel-plated steel  Nickel-plated steel, brass  Ohasil  Opruge, sigurnosni prsten i čivije od plemenitog čelika  Perbunan  Perfluoroalkoxy alkane (PFA)  Plastic (ABS)  Plastic (POM)  Plastic Grivory (PA 61/XT)  Plastic, Nickel plated brass  Plastika  Plemeniti čelik  Plemeniti čelik 1.4401  Plemeniti čelik 1.4404  plemeniti čelik 1.4571  poliamid (PA)  Polyamid PA 12, hard (according to DIN 73378)  Polypropylene (PP)  Polyurethane (PUR)  Polyurethane foam  presovani mesing  PTFE (politetrafluoretilen)  PVC with integrated special fabric  Ručica od aluminijuma  Ručica od čelika i žute zaštitne plastike  sealing: FKM (FPM)  sealing: PTFE  sealing: Teflon/NBR  Silicone  Sleeve: Galvanised steel  Spojni komad, deblokirajuća čaura, telo ventila i ventil od mesinga  Spring: Stainless steel  stainless steel 1.4305  Stainless steel 1.4401/1.4408  stainless steel 1.4404 (AISI 316L)  Stainless steel 1.4408  steel (FeP04), plastic coated  Steel 1.0039, 1.0345  Steel housing powder coated, perforated sheet galvanized steel, polyester felt discs  Steel or Stainless steel  Steel, rubber  Surface coated aluminium  Technopolymer  Telo od acetat kopolimer; O-prsten od nitrila  Threaded piece: Galvanised steel  to 10 bar: plastic Grivory (PA 61/XT) bzw.; to 16 bar: Alu black eloxed  Valve: Die cast zinc (Zamak)  Vulkanska vlakna  Zaptivanje kugle od PTFE  Zaptivka: NBR  Zinc plated steel ST 37-2  Čelik  Čelik / kompozitni materijal